Paul Furlong

Job Title: EDM Machinist  Location: Stroud, GloucestershireShift: Double Day shiftSalary: Competitive + Benefits My client is looking for a skilled EDM Machinist/Spark Eroder to set up and operate multiple EDM machines in line with the delivery requirements of the business, ensuring that products are produced efficiently; that they are of the right quality, quantity, and cost.Responsibilities Set the machines using the set-up sheets, tooling/fixtures and Edgecam programs provided by the Production Engineering Department. Work to the priorities of the “Work to List” or as “Set Out” by Production Supervision. Run the EDM/Wire machines in line with the programs and monitor performance to ensure the cycle time meets the estimated costed time given to the works traveler. Carry out cycle inspection of the parts produced, using micrometers, verniers and coordinate measuring machine reports. Where required the completion of an Actual Dimensional Report Sheet (ADRS) required for each part may need to be completed. Where changes are necessary, provide feedback to Production Engineering by completing a Program Prove Out Improvement Request when CNC Programs / Tooling / Set Up Sheets need correcting or can be improved. Ensure good and professional communication is maintained with your opposite shift machinist during shift handover. Ensuring non-conforming parts are reported immediately, with root cause analysis, documented and given to the Machine Shop Supervisor. Attention to detail ensures that parts meet strict specifications, directly contributing to the reliability and safety of final products. Additionally, you uphold safety protocols and work effectively within team settings, fostering a collaborative environment that promotes continuous improvement and productivity. It is expected that the operator will support the work of the company apprenticeship program & on the job training when needed. Ensure the tooling, jigs and fixtures are stocked and in working order at all times Qualifications & Requirements– EDM Machinist   Operate and control EDM machines and other equipment in the machine shop, following relevant procedures.Read and understand CNC machine code to the level necessary for machine setup and operation.Comprehend setup parameters and their impact on the machining process, including datum setting and tool length and wear offsets.Set up machines with the appropriate work holding and tooling, adhering to relevant procedures.Perform machining operations efficiently as per Job Card instructions to meet required output levels.Able to operate EDM machines/ Electro Discharge machines/ wire machinesAble to read and interpret engineering drawings.Experienced in all aspects of workshop practice.Experience in all aspects of EDM/Wire setting and Improvement of processes.Experience and knowledge in working with Duplex and Nickel Alloy Materials.Good numerical and literacy skills to do metric conversions from engineering part drawings.Experience of parts inspections using gaugesAbility to run multiple similar machines. For more information on this role, please contact Paul Furlong on 01453 829789 or send a copy of your CV to [email protected] who are currently a Spark Eroder, Wire eroder or CNC Machinist with a manufacturing background may be suitable for this positionFor details of other opportunities available within your chosen field please visit our website www.omegaresource.co.ukOmega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.

I am representing an exciting Bristol-based business going through a period of growth. I am looking for a Build Technician to join their highly skilled team of engineers. You must be able to take a pragmatic view on balancing workload and prioritising based on business demands. You will have an excellent eye for detail and pride yourself on high quality workmanship.Key Responsibilities – Build Technician   Contribute to ensuring the workshop environment is kept to a high standard.Deliver mechanical sub-assemblies and full machine assemblies to a consistently high standard.Keep build documentation up to date.Support current and continually develop and improves goods in and stores processes.Communicate clear feedback on assembly processes and work instructions to ensure perpetual improvement.Travel to customer sites both nationally and globally for installation and maintenance. Qualifications & Requirements – Build Technician Experience working in a highly productive assembly environment.Excellent understanding of tooling and assembly processes.Experience working in a tight team environment.Full UK Driving Licence.Able to travel.Ability to read and understand engineering drawings, specifications, and requirements Nice to Have’s Forklift licence up to 3.5 ton.Experience of inspection and quality control.Experience of stock/inventory management. What we can offer – Build Technician   Competitive compensation and benefits packageChallenging projects in dynamic collaborative teamPrivate Medical insuranceA passionate, fast-paced, open and transparent culture. People work in a flat structure with hands-on application, innovation and experimentation constantly in mind.25 days holiday plus Bank Holidays For more information on this role, please contact Paul Furlong on 01453 829789 or send a copy of your CV to [email protected] who are currently a Mechanical Fitter, Mechanical technician or Assembly & Test Engineer may be suitable for this positionFor details of other opportunities available within your chosen field please visit our website www.omegaresource.co.ukOmega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.

Quality Inspector Location: TewkesburyShift : Day shiftExcellent package & great working environmentAn exciting opportunity has arisen with my client. They are a world-renowned engineering business. They are looking for a Quality Inspector to join their expanding team. The successful candidate will be responsible for Carrying out Central & Goods Inwards Inspection activities. This will include, but is not limited to, product and process audits, supporting ongoing continuous improvement activities throughout the business, development of a team culture within the inspection functions, and across the business.The post requires a working knowledge of best practice metrology processes.Duties and responsibilties: 1)       Carry out inspection of First-off items and supplied goods using a combination of manual gauging, CMM and surface testing equipment.2)       Carry out in-process inspection audits and provide constructive feedback to machine shop and assembly staff.3)       Monitor the use and condition of in-process and central inspection gauging.  Ensuring that gauging is returned for calibration in-line with the calibration schedule.4)       Liaise with the Manufacturing Engineering team during process development to ensure that inspection requirements/methods are captured at the earliest possible stage of process definition.5)       Utilise MSA and SPC as the basis for driving on-going process improvements.6)       Undertake training on inspection processes and equipment where necessary.7)       Support Engineering with new product and new process introductions.8)       Support the implementation and subsequently maintain systems and procedures to ensure continuing compliance with the AS: EN 9100, ISO 9001 Quality Management system and PED directive requirement and any project specific Quality requirements.10)   Support the review of Final and stage drawings prior to release into production.11)   Review areas of concern for continuous improvement activities.12)   Ensure all documentation is accurately maintained and archived to aid product traceability. Knowledge & abilty required: knowledge of ISO9001:2008 (AS9100:2009 experience preferred).Extensive knowledge of metrology processes.knowledge and experience of CMM systems (Aberlink).Knowledge and experience and ability to read and understand Engineering drawings (including geometric tolerancing).A team player with the ability to work on own initiative, and able to influence others by demonstrating a positive “can do” attitude.Ability to work at pace in a multi-project environmentComputer literate with an understanding of MS Excel, MS Word and MS Project.Good communicator at all levels. The post holder will desirably have, or will be able to develop Experience in the use of industrial MRP, MRP-II or ERP tools; ideally Syteline  What we can offer They offer attractive rates of pay.33 days holiday (including Bank Holidays)Health coverStrong overtime rates Potential career progressionThey promote a positive, approachable and welcoming culture throughout the company. For further details, please contact Paul Furlong by email on [email protected] – or by phone on 01453 829 789.Omega Resource Group is acting as an Employment Agency in relation to this vacancyOmega Resource Group is an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors. Candidates who are currently a Goods in inspector, CNC Machinist or Metrology graduate may be suitable for this positionFor details of other opportunities available within your chosen field please visit our website www.omegaresource.co.ukOmega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.

Quality InspectorDouble Day shift Salary : Up to £36,000 per annum (including shift allowance) I am looking for an experienced Quality Inspector with an Engineering background.  Are you an experienced Quality professional? Are you looking to progress your career and work in an industrious and thriving aerospace environment?  My client iis looking for an experienced Quality Inspector to join their expanding team on a pernanent basis The successful candidate for the Quality Inspector vacancy will come from an engineering environment and have experience in the following  Verniers & Calipers Manual & Visual  Inspection techniques Excellent attention to detail and paperwork experienceExperience of CMM'sKnowledge if FAIRs ISO9102 FamiliarityA positive "can do" attitude A passion for learning new skills Shift Flexibility  In return the successful candidate for the Quality Inspector position will receive:  - Competitive salary  - Excellent career progression and ongoing training  - Positive and welcoming working environment  For further details, please contact Paul Furlong by email at [email protected] – or by phone on 01453 829 789. Candidates who are currently a Quality technician, visual inspector or CNC machinist may be suitable for this positionFor details of other opportunities available within your chosen field please visit our website www.omegaresource.co.ukOmega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.

Job Title: Controls Engineer Location: Gloucester, UKShift: DaysSalary: £50,000 to £60,000 per annum + Benefits My client is looking for a Controls Engineer to provide Controls System development and support of special purpose automated machinery supplied worldwide.Key Responsibilities – Controls Engineer Carry out a range of PLC, HMI and Motion Control programming and modification work.• Carry out software & hardware configuration of networked control systems with distributed Input Output (IO).• Carry out the programming and integration of vision systems for inspection & measurement using Cognex or similar products.• Control system support of prototype, new machine builds and existing equipment in the field.• Ensure and oversee machine safety to the relevant international standards and practices.• Prepare support documentation to assist both machine manufacture, testing and customer documentation packages.• Provide customer support and be prepared to travel on site as required.• To identify opportunities for process, productivity and quality improvements.• To adhere to and always apply all workplace management rules consistently.Qualifications & Requirements– Controls Engineer Qualified to HNC / HND or equivalent in a Software related discipline.Proven experience of PLC, HMI and motion programming preferably using Rockwell Logix platform, Safety PLC, Kinetix motion control, Studio 5000 and FTViewME. Siemens Control systems & TIA portal advantageous. Knowledge and programming of robotic applications preferred (Yaskawa preferred).Knowledge of vision systems preferableExcellent communication skills, both written and orally.Self-motivated and enthusiastic and able to communicate at all levels.Positive attitude with ability to work within culturally diverse environments.Helpful and supportive approach to resolution of technical challengesReceptive and adaptable to changeAble to travel internationally to customer sites. Travel is approximately 2-3 weeks in duration for 4-5 times per annum but will vary depending on projects.What we can Controls Engineer•              Competitive salary•              25 days holiday (plus bank holidays)•              Private Medical Insurance•              9/10 shift pattern•              Excellent Life assurance package Excellent working environment and supportive culture For more information on this role, please contact Paul Furlong on 01453 829789 or send a copy of your CV to [email protected] who are currently a Controls Engineer, Maintenance Engineer or Service Technician with an automation background may be suitable for this positionFor details of other opportunities available within your chosen field please visit our website www.omegaresource.co.ukOmega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.

Mechanical FitterGloucester Full time Permanent Dayshift Key Responsibilities – Mechanical Fitter The role is to ensure assemblies are manufactured correctly to specification and on time.• To fit and assemble machine parts accurately to engineering drawing.• To accurately fit sub assembly parts using engineering drawings.• Use hand tools and power tools to fit and assemble components.• Use pillar drills, deburring tools and grinding wheels safely where necessary.• Use engineering measuring equipment where necessary to ensure components are tospecification.• Drill and tap components when necessary.• Ensure all torque requirements are met and marked as per procedure.• Fit / pipe pneumatic and water circuits using either copper or plastic pipe work.• Strip / prepare machines and tooling for painting and despatch.• Install machines at customer sites as necessary overseas.• Ensure safe systems of work are always adhered to and ensure any issues are reportedimmediately to management.• Ensure all tools and equipment are maintained and stored safely.• Ensure all non-conforming parts or design issues are reported in a timely manner usingNCR/ECR forms.Qualifications & Requirements – Mechanical Fitter • Mechanical Apprenticeship.• Proven ability to read and understand technical engineering drawings and specifications.• Ability to read pneumatics drawings advantageous.• Flexibility to travel abroad to customers if required.• Proven effective communication skills, both written and verbal.• Basic computer literacy.What we can offer – Mechanical Fitter company pension plangroup life assurancegroup income protection,generous annual leaveemployee incentive planprivate medical insurance For more information on this role, please contact Paul Furlong on 01453 829789 or send a copy of your CV to [email protected] who are currently a Mechanical Assembler, Production Fitter, Maintenance Technician or Aircraft Fitter may be suitable for this positionFor details of other opportunities available within your chosen field please visit our website www.omegaresource.co.ukOmega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.

A fantastic role has come up with my Gloucester-based client, a global engineering business, they are looking for a Quality Engineer to join their skilled team. The successful candidate for the Quality Engineer role will Monitor, assess and report on quality of product and processes, ensuring manufacturing processes are performed correctly and in line with required standards and specifications.Key Responsibilities – Quality Engineer Improvement of compliance and quality of products/services.Monitor, test and report on quality of product and processes, ensuring manufacturing processes are performed correctly and identifying non-conformances and improvement opportunities.Review, improvement, design and implementation of standard operating procedures and processes to ensure that products meet required specification and customer expectations.Carry out root cause analysis, problem solving and implement correction and corrective actions.Initiate, recommend and deliver solutions to improvement opportunities.Support deployment of Lean and Six Sigma methodologies within the Business Unit.Drive NCR’s close out in a timely manner with stakeholders across the business.Drive Zero Non-conformance and Right First Time Culture using recognized techniques.Conduct Internal / External Quality & Compliance audits.Improve Customer satisfaction and progressive improvement of Business Unit KPI’s.Provide Quality data / reports in a timely manner.Maintain relevant quality documentation.Raise corrective action requests and manage timely close out with relevant parties Qualifications & Requirements – Quality Engineer Minimum HNC Qualified (Quality or Manufacturing Engineering).Minimum Quality Management Diploma.Trained in Root Cause Analysis techniques.Minimum Trained Internal Auditor.Lead Auditor (beneficial).In depth knowledge of ISO 9001. Experience: Ability to understand and interpret engineering drawingsAbility to understand and interpret customer specificationsAble to identify and resolve problems using a structured and data driven approachTraining/Experience in Lean and/or Six Sigma methodologies is beneficialExperience working with Quality Management Systems (QMS)Application of measurement, analysis or continuous improvement toolsRoot Cause and Corrective Action practitioner using recognized techniquesPC literate - capable user of MS Word, MS Excel, MS Outlook and MS PowerPoint.Minimum one-year related experience and / or training or equivalent combination of education and experience What we can offer – Quality Engineer Competitive compensation and benefits packageChallenging projects in dynamic collaborative teamProgression opportunities and ongoing trainingA welcoming and positive working environment For more information on this role, please contact Paul Furlong on 01453 829789 or send a copy of your CV to [email protected] who are currently a Quality technician, Quality inspector or Supplier Quality Engineer may be suitable for this positionFor details of other opportunities available within your chosen field please visit our website www.omegaresource.co.ukOmega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.

Job Title: Panel WirepersonLocation: Cirencester Pay Range/details: Up to £30k per annum Contract Type: Permanent Day shiftA great opportunity for a skilled Panel Wireperson or electrical specialist to join a rapidly growing business in Gloucestershire. The successful candidate for the role of Panel Wireperson will work as part of a team in order to correctly wire electrical assemblies and switchgear according to the engineering specifications.Key Responsibilities – Panel Wireperson Read and understand electrical drawingsSecure and fix cables, looms, switches and other electric devices to assembliesAssembly of electrical wiring looms to drawingsUse electrical measuring equipment where necessaryDrilling and tapping of components when necessaryUse pillar drills, and hand tools where necessaryAble to complete soldered connections to electrical drawingsComplete electrical panel terminations to electrical drawings Assembly of electrical termination boxes, plugs and other electrical components to drawingsSwitchgear Cabinet assembley  Qualifications & Requirements – Panel Wireperson Previous electrical experience in panel wiring and loom building, qualifications are desirable but not essential.Proven ability to read and interpret electrical drawingsProblem solving attitudeSelf-motivated with desire to improve working practicesProven team player What we can offer –Panel Wireperson Potential overtime Positive working culture Free onsite parkingpotential career development Pension  For more information on this role, please contact Paul Furlong on 01453 829789 or send a copy of your CV to [email protected] Resource Group is acting as an Employment Agency in relation to this vacancy.  Omega Resource Group is an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors.  Candidates who are currently a Wireprson, Control panel Wireperson, Electrical Technician or Loom Builder may be suitable for this positionFor details of other opportunities available within your chosen field please visit our website www.omegaresource.co.ukOmega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.

Job Title: International Service Engineer   Shift: Day shift  Location: Gloucester Salary £40000 to £45000 per annum + Excellent benefits package A great role with a fast-growing, established manufacturing business based in Gloucester. They are looking for an outstanding engineer to join their international service team.Key Responsibilities – International Service Engineer   The position involves the setting and testing of automation machinery prior to despatch, commissioning in customer’s overseas factories and the training of operator and maintenance personnel in the use of their equipment.Duties – International Service Engineer    Setting and testing of the client’s full range of equipment.Final testing and assembly of machinery in preparation of inspection and despatch.Installation and Commissioning of equipment.Training of customer’s staff at various levels at both the client’s and customer’s overseas premises.Report writing and recommendations following all visits.Liaise with Sales, Production and Design.Extensive Worldwide travel including weekend work & travel where required.To ensure that all relevant machine documentation is always completed accurately.To identify opportunities for process, productivity and quality improvements by highlighting issues to management.To actively participate in improvement projects as required.Develop effective relationships with all internal and external stakeholder, customers and suppliers. Qualifications & Requirements – International Service Engineer   Must have completed a recognised Engineering Apprenticeship. ONC or HNC in Engineering would be advantage.Mechanically based skillset with a proven track record of mechanical assembly and fault diagnosis.Able to use measuring equipment such as Micrometre and Vernier callipers with an attention to detail.Able to read and interpret mechanical assembly drawings.Able to read and interpret pneumatic drawings and circuits. Fault find pneumatic circuits to component level.Basic understanding of electrical control circuits.Basic understanding of PLC Machine controls.Able to write concise informative reports and offer solutions to problems.Self-motivated and enthusiastic and able to communicate at all levels.Must hold a valid passport and be willing to travel internationally and be very flexible in terms of working hours and travel.Comply with the latest vaccinations, inoculations and blood tests for foreign travel. What we can offer – International Service Engineer   25 days annual holiday plus all bank holidays9/10 shift patternPrivate Medical insuranceA supportive, inclusive environmentOngoing training and development Call for action: For more information on this role, please contact Paul Furlong on 01453 829789 or send a copy of your CV to [email protected] who are currently a Maintenance Engineer, Field Service Engineer and Asset Care Engineer could be suitable for this roleFor details of other opportunities available within your chosen field please visit our website www.omegaresource.co.ukOmega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.

Job Title: CNC Miller Programmer Setter Operator Shift: Day shift Monday to Thursday 7.30am to 4.30pm Friday 7.30am to 12.30pmLocation: North Bristol A great role with a fast-growing, established precision engineering business based in North Bristol. They are looking for a time-served CNC Miller to program, set and operate CNC Mills using Heidenhain controls.Key Responsibilities – CNC Miller Programmer Setter Operator They will be required to accurately read and interpret technical drawings to correctly machine a variety of materials to customer specific processes and requirements, perform appropriate duties as assigned by management, maintain a safe and clean workspace and follow established safety rules and regulations.Report breakdowns, equipment faults and concerns to ManagementBe actively involved in improvement activities to support the achievement of departmental and company objectivesEnsure all lost time, minor and trivial accidents are reportedUndertake continuous training and developmentSupport the engineering team with quotations if requiredAssist in tooling buy off and trialsAbility to self-inspect own work using precision inspection tools and devicesAssembling, fitting, and repairing tools Qualifications & Requirements – CNC Miller Programmer Setter Operator Good communication and interpersonal skillsEffective problem-solving skillsAbility to work alone or as part of a small teamGood understanding of customer deliverables and the impact of failure/cost of poor qualityPrevious experience within the aerospace tool making industry advantageousEngineering apprenticeship as a tool maker or equivalentMinimum 5 years previous experience working in a tool making/engineering environmentExperience working with an MRP system and following standard operating procedures / work order instructionsThe successful candidates will have the opportunity to become part of our strong team and enjoy the benefits of working in a friendly atmosphere for a long-established family company who care and support their employees and have a track record for training and developing staff. What we can offer – CNC Miller Programmer Setter Operator 25 days annual holiday plus all bank holidaysCompetitive salary based on experienceOvertime paid at 1.3 weekdays and 1.5 weekendsA supportive, inclusive environmentOngoing training and development Call for action: For more information on this role, please contact Paul Furlong on 01453 829789 or send a copy of your CV to [email protected] who are currently a CNC Machinist, Production Engineer, Toolmaker or CNC Setter may be suitable for this positionFor details of other opportunities available within your chosen field please visit our website www.omegaresource.co.ukOmega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors.